Focus-enhancements DVCPRO/DV User Manual download pdf (Page 40)

Quickstart

FS-100 Portable DTE Recorder

Installing / Removing the Battery Pack

Installing a Battery

1. Place the unit, so that the battery compartment is up.

2. Position the battery pack, as shown above, so that the

latch hook is almost in the latch slot, and touching the

floor of the battery compartment.

3. Slide the battery forward while gently pressing down.

4. Feel the battery slide along guides and seat itself.

5. When seated, the battery latch clicks into place.

Removing a Battery

1. Slide the battery latch to the left and hold.

2. Apply backward pressure to the battery pack at the

triangle/arrow and gently slide the pack back about 1cm

or 3/8 in.

3. This is the reverse motion of inserting the battery.

4. Remove the battery pack.

Battery

Latch Hook

Gently press DOWN

while sliding battery pack

FORWARD

Battery Pack Guides

Latch Slot

Latch

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 161 162

No comments

Focus-enhancements DVCPRO/DV User Manual Page 40